E ABS(Easy ABS) 3D Printer Filament 1KG

$24.99 $22.99SAVE 8%

Shipping calculated at checkout.

Select the warehouse location to ship out: USA

  • Europe
  • USA
  • UK
  • Australia
  • Canada

Color: Natural(White)

  • Natural(White)
  • Black
  • Grey
Out of stock

Guaranteed Safe Checkout

visapaypalapple paygoogle paymaster
Order in the next to get it between and hoursminutes
SUNLU Easy ABS filament 1.75mm 1KG spool

What is SUNLU Easy ABS?

We adjusted the ratio between the three (Acrylonitrile, Butadiene, Styrene) and added a little SUNLU wisdom into the mix.
While the hardness and acid and alkali resistance remain the same, SUNLU have slightly reduced its heat resistance.
The result is a minimum printing temperature of 225¡ãC and a minimum heating of 70¡ãC for the base plate.
But E-ABS still maintains the low stress it should have: no cracking, no warping!

1. Printing does not need a holding tank, open printer can be used!
2. Low shrinkage, print models do not warp or crack!
(Note: Printing the bottom 10 square centimeters above the model can raise the temperature of the base plate to 80 ~ 90 degrees.)
3. Very low odor when printing
4. Filament do not need to dry, very little impact by humidity
5. balanced physical properties, high strength, good toughness

Material: SUNLU E-ABS(Easy-ABS)
Wire diameter: 1.75/3.0MM
Tolerance: ¡À 0.02MM
Printing temperature: 225-235 ¡æ
Base plate temperature: 60-70¡æ
Melt index: 98g/10`min
Elongation at break£º20%
Melting point ¡æ: 130
Heat distortion temperature ¡æ: 57.9
Density g/cm3: 1.04
Printing speed: 40-60mm/s
Bubble: 100% zero bubble
Net weight: 1 KG/roll
Gross weight: 1.3 KG/roll
Length: 1.75MM(1KG)=395M

Not enough items available. Only [max] left.
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page


Select your currency

E ABS(Easy ABS) 3D Printer Filament 1KG

USA / Natural(White)
USA / Natural(White)
$24.99 $22.99