Glow in The Dark (Luminous) PLA 3D Printer Filament 1KG

$24.99 $22.99SAVE 8%

Shipping calculated at checkout.

Select the warehouse location to ship out: USA

  • Europe
  • USA
  • UK
  • Canada
  • Australia

Color: White Filament (Glow Green)

  • White Filament (Glow Green)
  • White Filament (Glow Blue)
  • Yellow Filament (Glow Yellow)
  • Red Filament (Glow Orange)
Out of stock

Guaranteed Safe Checkout

visapaypalapple paygoogle paymaster
Order in the next to get it between and hoursminutes

The new upgraded model SUNLU Grow in Dark PLA is 300% brighter

and 200% lasts longer than the old model!

¡¾Glow in The Dark White PLA¡¿Contains phosphorescent materials that glow in the dark after absorbing light energy; The glow effect is stronger when exposed to UV light. Please note that this type of filament should avoid long exposure to direct sunlight;The longer the exposure time, the faster the color fades.

¡¾Dimensional Accuracy & Consistency¡¿Glow in The Dark PLA filaments to be strict tolerances; Diameter 1.75mm, dimensional accuracy + / - 0.03 mm without any exaggeration; 1 kg spool (2.2lbs)
¡¾Clog-Free, Bubble-Free & Easy-to-use¡¿Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag.
¡¾Wide Compatibility¡¿Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.03mm.
¡¾Worry-free After-sales Service¡¿ We provide professional after-sales service for any SUNLU 3D filament you have purchased, which is more considerate and assured.

Material: Grow in Dark PLA(PLA Based)
Wire diameter: 1.75/3.0MM Tolerance: ¡À0.02MM
Printing temperature: 200-210¡æ
Substrate temperature: no heating needs to be coated with glue
Heating 50-65¡æ can not be coated with glue
Tensile force KGF: 11-16 (enterprise standard 23¡æ wire diameter 1.75 mm)
Melt index: 7-9g/10min (190¡æ,2.16Kg) (refer to GB/T 3682.1-2018)
Elongation at break: 4% (enterprise standard 23¡æ, wire diameter 1.75 mm)
Melting point: 165-180¡æ
Heat distortion temperature: 55¡æ
Density g/cm3: 1.24
Water Absorption: 0.5%
Suggested printing speed: 50-100MM/s
Bubble: 100% zero bubble
Net weight: 1 KG/roll
Gross weight: 1.3 KG / roll
Length: 1.75MM(1KG)=330M, 3.0MM(1KG)=330M, 3.0MM(1KG)=330M, 3.0MM(1KG)



SUNLU PLA Grow-in-Dark Data Sheet

If there are any order shipping or other issues, please email after-sales service at sales02@sunlu.com
If there are any product quality issues, please email tech-service at support@sunlu.com
Click here for more information(Return Policy)

For non-pre-sale orders, the delivery time is generally 1-7 working days, and you can track your order on the website.
Click here for more information(Shipping Policy).

You selected the wrong country/region, please go back to the product page, click the correct country or region where you are, and then select the product to checkout.
We can only ship from the warehouse in the corresponding country/region and cannot ship across country or regions.

PLA is the most commonly used 3D printing material, it is economically and begainner-friendly with rich colors.
PLA Meta is an upgraded version of PLA, with lower printing temperature, better toughness and softer colors.

PLA is a food-safe material, but the filament will be added with toner during the production process, and it may also be contaminated by the printing nozzle during the printing process, so we do not recommend you to use PLA to print tableware

The printing quality will be affected if the PLA is moistured. Please pay attention to moisture-proof of the filament, or use a drying box to dry the filament

To store PLA filament and PLA+ filament, it is recommended to keep them in a dry and cool place, away from direct sunlight and moisture.

Clean the nozzle, try turning the printing temperature up.

Check the distance between the nozzle and the hot bed, try to increase the printing temperature or the hot bed temperature

PLA and PLA+ filaments are recyclable.

PLA and PLA+ filaments can be used on most FDM 3D printers, as long as the printer's hotend temperature can reach the recommended temperature for the filament

Subscribe to our newsletter, you can get a 10% discount for your first order, and at the same time, you can receive the latest promotion information and new product release information of Sunlu

Not enough items available. Only [max] left.
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page


Select your currency

Glow in The Dark (Luminous) PLA 3D Printer Filament 1KG

USA / White Filament (Glow Green)
USA / White Filament (Glow Green)
$24.99 $22.99